Hampshire Cut Edge Corrosion Treatment

WHAT IS CUT EDGE CORROSION TREATMENT?

Cut edge corrosion treatment in Hampshire tackles the rust that forms on the exposed cut edges and end laps of plastisol-coated steel sheets. As the factory coating ages, the edges break down first, exposing bare steel that quickly rusts and creeps up the sheet, lifting the surrounding plastisol as it goes. It is the single most common reason older cladding and roofs in Hampshire start to fail.

At Colorkote, our specialist Hampshire team halts the process by treating the rust, priming the bare metal and sealing the edge with manufacturer-approved Tor and Delcote systems, finished with colour-matched topcoats. The treatment prolongs the life of the sheeting by up to 15 years and is backed by an Insurance Backed Guarantee, all without the cost and disruption of replacement.

WHY CUT EDGE CORROSION TREATMENT IS ESSENTIAL

Protects Surfaces from Corrosion & Wear

Corrosion at the sheet edges of Hampshire cladding accelerates over time, taking more coating with it. Specialist cut edge corrosion treatment stops that spread, sealing the edge against further rust.

Improves Safety & Compliance

A degraded building envelope in Hampshire is both a safety and an insurance concern. Treating cut edge corrosion promptly restores the integrity of the cladding and roof and protects everyone around the building.

Extends Asset Lifespan

Cut edge corrosion treatment in Hampshire prolongs the life of plastisol sheeting by up to 15 years, backed by an Insurance Backed Guarantee. That is decades of additional service from cladding that might otherwise need full replacement.

Enhances Professional Appearance

Rust streaks running down profiled cladding instantly age a Hampshire building and damage tenant and client perceptions. A professional cut edge corrosion treatment removes those streaks, re-establishes a crisp colour line and restores kerb appeal.

Cost-Effective Refurbishment

Cut edge corrosion treatment is the smart, cost-effective alternative to re-cladding in Hampshire. It extends the life of the existing sheets by up to 15 years at a fraction of the cost, with no need to close the building.

REQUEST A CALLBACK

Lorem ipsum dolor sit amet, consectetur adipiscing elit ed rutrum pharetra risus.

Roof Spraying

Restore and waterproof your Hampshire roof alongside cut edge corrosion treatment, with manufacturer warranties of up to 25 years.

Cut-Edge Corrosion Treatment

Cut edge corrosion treatment for Hampshire commercial cladding, halting rust at the laps and edges with manufacturer-approved systems.

Cladding Spraying

Refresh the full cladding panel as well as the edges. Our Hampshire cladding spraying service rebrands and protects the whole building envelope.

Window & Curtain Wall Spraying

Restore aluminium windows and shopfronts on your Hampshire building on site, while the access is already in place for the cladding works.

Industrial uPVC Spray Painting

Recolour tired uPVC windows, doors and fascias across Hampshire with specialist coatings made for plastic, at a fraction of replacement cost.

OUR CUT EDGE CORROSION TREATMENT PROCESS

Step 1: Initial Consultation & Site Survey

We start with a free survey of your Hampshire building, measuring the affected edges, photographing each elevation and recommending the right cut edge corrosion treatment system and programme.

Step 2: Surface Preparation

Preparation is critical. On every Hampshire job we rake back loose coating, remove rust to a sound substrate, feather the edge and prime the bare metal before treatment.

Step 3: Cut Edge Corrosion Treatment Application

Our Hampshire team applies the chosen Tor Elastaseal Fibretex or Delcote Seamsil system over the prepared edge, encapsulating the corrosion and sealing every lap and cut edge.

Step 4: Quality Checks & Final Handover

Final handover on your Hampshire site includes colour-matched topcoats, a full inspection against specification and your Insurance Backed Guarantee paperwork.

Our projects

Sky London Campus

Sky – Sky 2 / Sky 4

Colorkote has successfully completed a number of large scale spraying and painting projects for Sky within their London Campus. Due to the construction of the new Flagship Sky Central office complex including studios, a number of existing buildings were looking tired and due to the high profile visitors that Sky attracts they wanted these buildings re-coated and brought up to date.

London

Residential Blocks

This group of 10 blocks of flats are undergoing full window replacement. The surrounding wooden fascia, soffits and shiplap boarding required full decoration to match the new wooden windows. All the 105 flats are occupied, meaning all works had to be carefully programmed to cause minimal disruption to the residents. All works were completed using fixed scaffolding supplied by the main contractor.

London

Waste Recycling Plant

The site was a blight on the landscape being a very large building of bright colour. The client wished to tone down the building to blend in with the local landscape. A 10 yr warranty was requested on the completed work, and the building required very specialist high-level access, especially for the chimneys. Additionally the site needed to remain fully operational with hundreds of lorry deliveries daily.

FAQS

How can I tell if my Hampshire cladding is affected?

Look at the bottom edge of vertical cladding sheets and the end laps of roof sheets across your Hampshire building. Brown rust streaks, flaking plastisol and a rough, bubbled edge are the classic signs. We will confirm during a free site survey.

What is the cost of cut edge corrosion treatment in Hampshire?

How many years will cut edge corrosion treatment last in Hampshire?

Yes. Our Hampshire cut edge corrosion treatment is backed by an Insurance Backed Guarantee of up to 15 years when applied to manufacturer specification.

Can we keep operating during cut edge corrosion treatment in Hampshire?

No. Tenants inside your Hampshire building are barely affected, as the works are carried out externally and programmed around your operation.

Can you colour-match the topcoats in Hampshire?

Every time. We match the topcoats to your existing Hampshire cladding colour so the treated edges blend in seamlessly.

How fast can you mobilise in Hampshire?

We can usually survey your Hampshire building within a week and start works within 2 to 4 weeks of order. Call 01202798993 to discuss timings.

OUR COVERAGE AREA

Colorkote’s cut edge corrosion treatment covers the whole of Hampshire and beyond. We work on industrial estates, business parks, warehouses, distribution centres and retail parks throughout the Hampshire region, and our crews regularly mobilise out to surrounding towns, villages and neighbouring districts. From a single building to a portfolio of sites, we have the resource to match the project. Our nationwide capability also means we can take on work at any UK site you operate. To talk to a senior estimator about your Hampshire project, call 01202798993.

Cut Edge Corrosion Treatment Hampshire

GET A CALLBACK FROM OUR DORSET TEAM