Poole Cut Edge Corrosion Treatment

WHAT IS CUT EDGE CORROSION TREATMENT?

Cut edge corrosion is the creeping rust that attacks the cut edges and end laps of plastisol-coated steel cladding and roof sheets. On Poole buildings it typically appears as brown streaks along the bottom of vertical sheets or the laps of a roof, where the original coating has broken down and the bare metal beneath has begun to corrode. Ignored, it spreads relentlessly and leads to full sheet failure.

Our Poole cut edge corrosion treatment stops the rust in its tracks. We feather back the failing plastisol to a sound edge, treat and prime the exposed steel, then build up and seal the edge with Tor Elastaseal Fibretex or Delcote Seamsil and colour-matched topcoats. The result is up to 15 more years of cladding life, backed by an Insurance Backed Guarantee.

WHY CUT EDGE CORROSION TREATMENT IS ESSENTIAL

Protects Surfaces from Corrosion & Wear

The danger with cut edge corrosion in Poole is how fast it spreads. Our treatment halts the chemical process at source, treats the exposed metal and seals the edge so the damage stops where it is.

Improves Safety & Compliance

Blown sheets and failing edges threaten safety on any Poole site. Cut edge corrosion treatment re-secures the envelope, removing the hazard and supporting your compliance and insurance position.

Extends Asset Lifespan

Properly treated, plastisol sheeting in Poole can last well over a decade longer. Cut edge corrosion treatment extends sheet life by up to 15 years and defers expensive re-cladding or re-roofing.

Enhances Professional Appearance

Nothing dates a Poole building faster than rust-streaked cladding. Our treatment removes the streaks, re-establishes a sharp colour line and lifts the appearance of the whole property.

Cost-Effective Refurbishment

For Poole building owners, treating cut edge corrosion is far more economical than re-cladding. It avoids sheet replacement and scaffolding, and the building stays open throughout the works.

REQUEST A CALLBACK

Lorem ipsum dolor sit amet, consectetur adipiscing elit ed rutrum pharetra risus.

Roof Spraying

Once the cut edges are treated, our Poole roof spraying service waterproofs and recolours the entire roof under a single warranty.

Cut-Edge Corrosion Treatment

Treat rusting cladding edges on your Poole premises before they fail, with specialist systems that extend sheet life by up to 15 years.

Cladding Spraying

Spray-applied refurbishment of full cladding panels in Poole, ideal alongside cut edge corrosion treatment for a seamless finish.

Window & Curtain Wall Spraying

Refresh aluminium windows, doors and shopfronts at your Poole premises while the cladding contractor is on site for cut edge corrosion treatment.

Industrial uPVC Spray Painting

Refresh uPVC windows, doors and fascias on your Poole building without replacement, using durable, colour-matched spray systems.

OUR CUT EDGE CORROSION TREATMENT PROCESS

Step 1: Initial Consultation & Site Survey

A senior estimator surveys your Poole cladding, measures the linear metres of corrosion, photographs the elevations and recommends the most suitable system.

Step 2: Surface Preparation

Preparation is critical. On every Poole job we rake back loose coating, remove rust to a sound substrate, feather the edge and prime the bare metal before treatment.

Step 3: Cut Edge Corrosion Treatment Application

We encapsulate the treated edge with Tor Elastaseal Fibretex or Delcote Seamsil, sealing the cut edge of every sheet on your Poole building against further corrosion.

Step 4: Quality Checks & Final Handover

We finish with colour-matched topcoats over the treated edges, inspect every elevation of your Poole cladding and hand over the Insurance Backed Guarantee paperwork.

Our projects

Sky London Campus

Sky – Sky 2 / Sky 4

Colorkote has successfully completed a number of large scale spraying and painting projects for Sky within their London Campus. Due to the construction of the new Flagship Sky Central office complex including studios, a number of existing buildings were looking tired and due to the high profile visitors that Sky attracts they wanted these buildings re-coated and brought up to date.

London

Residential Blocks

This group of 10 blocks of flats are undergoing full window replacement. The surrounding wooden fascia, soffits and shiplap boarding required full decoration to match the new wooden windows. All the 105 flats are occupied, meaning all works had to be carefully programmed to cause minimal disruption to the residents. All works were completed using fixed scaffolding supplied by the main contractor.

London

Waste Recycling Plant

The site was a blight on the landscape being a very large building of bright colour. The client wished to tone down the building to blend in with the local landscape. A 10 yr warranty was requested on the completed work, and the building required very specialist high-level access, especially for the chimneys. Additionally the site needed to remain fully operational with hundreds of lorry deliveries daily.

FAQS

How can I tell if my Poole cladding is affected?

Brown streaks, bubbling and flaking along the sheet edges and laps of your Poole cladding are the tell-tale signs. We will confirm and measure it during a free survey.

How much does cut edge corrosion treatment cost in Poole?

How durable is cut edge corrosion treatment in Poole?

Yes. Our Poole cut edge corrosion treatment is backed by an Insurance Backed Guarantee of up to 15 years when applied to manufacturer specification.

Do you need to close our Poole building for the works?

Very little. The works are carried out externally from MEWPs or scaffold, so your Poole building keeps operating normally throughout.

Do you offer colour matching for Poole cladding?

Yes. The treated edges on your Poole building are finished in a colour-matched topcoat so they blend perfectly with the surrounding panels.

What is the lead time in Poole?

Quickly. We can survey your Poole cladding within a week and mobilise within 2 to 4 weeks. Call 01202798993 to get started.

OUR COVERAGE AREA

Colorkote’s cut edge corrosion treatment covers the whole of Poole and beyond. We work on industrial estates, business parks, warehouses, distribution centres and retail parks throughout the Poole region, and our crews regularly mobilise out to surrounding towns, villages and neighbouring districts. From a single building to a portfolio of sites, we have the resource to match the project. Our nationwide capability also means we can take on work at any UK site you operate. To talk to a senior estimator about your Poole project, call 01202798993.

Cut Edge Corrosion Treatment Poole

GET A CALLBACK FROM OUR DORSET TEAM